← Index / personal

Hydrogen generator

I built both main types of hydrogen electrolysis system, then a fuel cell and a rocket to put the gas to use. It started as a course project, and I kept going after it ended.

CategoryCourse project, continued after
CourseMECH 4007
Year2022
Built4 working systems
Sealed dry cell electrolysis system with a clear plate, next to its bubbler
Overview

The course set an open-ended physical design project related to vehicles. Hydrogen was all over the automotive news, so I used it to learn how the technology actually works. It started as a course project, but I kept working on it after the course ended because I was interested in hydrogen fuel cells and in hydrogen-powered combustion engines, or using hydrogen to supplement one.

I built both main types of electrolysis system. A combined output system makes a mixed hydrogen and oxygen gas. A separate output system keeps the two gases apart, which is harder but means the hydrogen can be stored and used. Instead of the usual stainless steel, I used graphite electrodes. Research showed graphite was the most efficient of the tested materials, and since the pandemic put all the work in a bedroom, graphite could be cut with a rotary tool or a blade instead of a grinder.

The first proof of concepts used a store-bought container and a drilled lid. The separate output version proved that 3D printed parts could be watertight and gas tight. For the upgraded systems I built a sealed dry cell for the combined output, raising electrode area from about 100 mm² to 1,300 mm² and closing the gap between plates, and a fully 3D printed separate output system with a sealed screw lid. The dry cell made a lot more gas. The printed separate system kept the gases apart but was no more efficient, likely because the thicker walls needed to stop the PLA deforming under heat pushed the electrodes further apart.

To put the gas to use, I printed a small rocket and launch pad for the combined output, and built a hydrogen fuel cell that read 0.85 V running on pure hydrogen from the separate output system. The rocket’s last test ended with a loud pop that blew the caps off, which was the end of the testing I was willing to do in a bedroom.

Plenty of it failed along the way, and that’s where most of the learning came from.

Separate output system running
Combined output system running
Next · personalRally car